Hi slouken

Just to say that ive fixed the take screenshot issue myself for now by just importing the official steam controller chord config over my dualshock 4. It seems that something got messed up
popup causes erroneous constant input to be sent to the game the whole time the popup is active (at least in halo MCC, guns fired constantly and grenades get thrown etc) when using xinput method. Another

Deck's controls (Either touching the screen, holding down the trigger, or pressing the track pad, everything registers just fine)

In Desktop mode, the Deck's track pad/touch screen/Triggers still works
perfectly, but even mixing inputs from Deck/Mouse, only the Deck's inputs work as intended.

Hovering through things also seems strange. Buttons, icons, etc have an effect when you move the cursor above them

.

BTW, even after getting Steam to come up on the TV, it was only streaming the mouse/keyboard/controller input and the audio input, but *not* the video. So I'd run a game and be able to hear it and hear

Първоначално публикувано от Potatowheelchair:

Has anyone been able to resolve this issue when pairing your PC to the Samsung Smart TV Steam Link app? It finds my PC properly, but when I enter the PIN code into Steam on

Thanks, streaming.log says:

[2019-06-10 21:49:51] CLIENT: Attaching controller XInput Controller with ID 0
[2019-06-10 21:49:51] CLIENT: Attaching controller XInput Controller with ID 1
[2019-06-10
21:49:51] CLIENT: Attaching controller XInput Controller with ID 2
[2019-06-10 21:49:51] CLIENT: Resetting device 1 steam controller 0
[2019-06-10 21:49:51] Streaming started to Steam Link at

Forgotten (DX edition) [218410]
Steam Link Input Mode: Mouse
Game's mouse behavior: Relative mouse movement and absolute mouse movement
Issues:

• The game can swap between relative
  Edit: Steam Link Build 1.1.33 on May 25 added a trackpad mode to Steam Link, so this has been resolved.
  
  I guess I'll also be throwing in my requests for more mouse control options.
  
  The

port, issues should be reported in this thread.

Download the Steam Link package[dl.bintray.com].

Put
help with ScummVM itself: http://wiki.scummvm.org/index.php/User_Manual/Quick_Start

When using a controller, button mapping is as follows:
Left stick => Mouse
Right shoulder + Left stick => Slow

flawlessly - gigabit ethernet setup with a fairly robust PC.

2. About a month ago, it started occasionally not waking from its sleeping state after attempting to activate it from the controller. A quick
not acknowledge that it is even connected.

Attempted fixes
When the boot issues started, I tried a factory reset during one of the successful boots. After a couple more failed starts, it came

, SteamLink Beta 499 used. Using a XBox360 PC Controller wired to SteamLink.

I have 0.0% frame loss / packet loss
ping <1ms
input <1ms
I get a streaming latency (depending on encoding procedure) from 15ms (Big
audio-lag issue.

Tested this with "The Division Closed and Open Beta". This title is causing heavy CPU-loading while playing and running around the map. I was reducing the ingame graphics settings to a

Controller wired to SteamLink.

I have 0.0% frame loss / packet loss
ping <1ms
input <1ms
I get a streaming latency (depending on encoding procedure) from 15ms (Big picture) - 35ms (under heavy load), so quite
I was able to reproduce the problem. I was monitoring everything about my pc and guess what? The "spiking" (heavy load on CPU to 90~100 percent) is causing the audio-lag issue.

Tested this with "The

connection what kind of issues will crop up? Likely stuttering video and audio, pixelated images, and input lag from the controller. The general quality of the stream will be unreliable, variable, and be all
are external factors outside the hardware's control, like other electronics cluttering up the wireless frequencies, poor or variable signal strength, etc.

You want the wireless router as close as